Savin 9027DL Wartungshandbuch PDF herunterladen (Seite 217)

Figure 4:

As the dual cam plate rotates further, the cam groove and the pin move the

whole gripper assembly with the gripped copies back to the stapling position.

Then the grip motor stops.

Figure 5 and 6:

The upper gripper has a projection [A] for hooking the bin side plate [B].

When the gripper moves into the bin, the projection moves over the bin side

plate. When the grippers close, the projection hooks the bin side plate.

Therefore, the grippers bring the stacked copies into the stapler together

with the bin side plate.

When the grippers move to the stapling position, the S/S CPU checks the

paper sensor [C] to see if there is any paper there or not. If the paper sensor

is activated, the stapler motor starts rotating and the copies are stapled.

When the stapler motor stops, the grip motor starts rotating in reverse. Then

the gripper assembly brings back the stapled copies into the bin, the grippers

open, and the gripper assembly returns to the home position.

Fig. 4

[C]

[A]

[B]

[C]

Fig. 5

Fig. 6

A156/A160/A162 6-20 STM

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 268 269

Keine Kommentare

Savin 9027DL Wartungshandbuch Seite 217