Savin SLP20 Wartungshandbuch PDF herunterladen (Seite 128)

DIAGNOSTIC TEST MODES

G031/G032 4-26 SM

4.8.3 DETAILED DIAGNOSTIC MODE

Entering Detailed Diagnostic Mode

To enter this mode, turn the machine off and on while pressing the “On Line” key

and the “Enter” key together.

During the Test

While testing, the machine displays the component being tested.

If the Power LED blinks, the test is proceeding without problems.

If the Power LED does not blink, a fatal error has occurred. If the machine has

detected an error, the machine displays the error code (e.g. 0101) on the operation

panel, turns off the Power LED, blinks the Error LED, and stops the test.

If an error occurs during the test, press the “Escape” key and the “Form Feed” key

together to continue the test. However, if the error is one of those in the ‘Power-up

and Detailed Diagnostics Modes – Program Execution Errors” table (see section 7,

‘Troubleshooting’), the test cannot continue.

If the Centronics or RS232C loopback connector is not plugged in, an error will

occur for the device with the missing connector

Print Log Output

The print log is printed automatically after the detailed diagnostic test has finished.

CÓPIA NÃO CONTROLADA

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 273 274

Keine Kommentare

Savin SLP20 Wartungshandbuch Seite 128